Vortec Adjustable Cold Air Gun 610
8" Long Hose, 900 BTU/Hr Air Capacity, 1 Outlet, Cold Air Gun
10-5/8" Tank/Unit Length, 6.63" High Tank/Unit
Kit #61-967-6 Includes Adjustable Cold Air Gun, Magnetic Base, 5 Micron Auto-Drain Filter
Adjustable Cold Air Gun Kit w/ Magnetic Base - #61-967-6
- Uses only filtered, factory compressed air (80-100 PSIG) to produce cold air for spot cooling.
- The internal configuration reduces air temperature by 100° F below inlet temperature. Can be used to cool various machining operations without the use of liquid coolant.
- No Freon - No Moving Parts - Virtually Maintenance Free.
- Built in muffler.
- Meets OSHA noise specification.
- Includes magnetic base.
Versatile Spot Cooling for Machining, Repair Shops and More
Safe on metals, plastics, glass and ceramic parts.
Cold Air Guns use vortex tube technology and filtered compressed air to produce sub-freezing air as low as -30 deg F (-34 deg C) for numerous industrial spot cooling applications. With no moving parts to wear out, Cold Air Guns require no electricity, just a compressed air source. The air consumption range is from 15 SCFM to 35 SCFM.
Cold Air Guns are most often used for cooling of metal parts, in the machining and repair of metals, plastics, wood, ceramics and other materials. Cold air machining outperforms mist coolants and substantially increases tool life and feed rates on dry machining operations. The effective cooling from a Cold Air Gun can eliminate heat-related parts growth while improving parts tolerance and surface finish quality. Cold Air Guns have adjustable temperature and flow settings; and some models have a frost free nozzle to eliminate mess from frost and condensation.
Benefits:
- Increase dry machining speeds up to 36%
- Extend tool life by 50%
- Eliminates the mess, expense and safety concerns of using mist coolants
- Reduce waiting or normalization time by cooling parts faster
- Eliminate the potential for burning and scorching
- Avoid secondary parts cleaning after machining
- Reduce grinding wheel loading caused by overheating
- Airflow clears sawdust, shavings and dirt away from surface
Features:
- Creates cold air up to 100 F deg (+ 56 C deg) below the inlet compressed air temperature
- Quiet operation; meets OSHA noise specifications
- Adjustable temperature and flow rate
- Highly reliable with no moving parts
- Low pressure outlet air
- Uses only compressed air – no Freon
- System includes a magnetic base and a 5 micron auto-drain compressed air filter
- Magnetic base allows for easy, close in positioning and easy portability
- Ergonomic trigger mechanism on the Cold Air Pistol
- Frost free nozzle eliminates mess from frost and condensation
Specifications:
| Type | Cold Air Gun Kit |
| Air Capacity (BTU/Hr) | 900 |
| Hose Length (Inch) | 8 |
| Number of Outlets | 1 |
| Maximum Pressure (psi) | 100.00 |
| Minimum Pressure (psi) | 80.00 |
| Tank/Unit Length (mm) | 269.88 |
| Tank/Unit Length (Inch) | 10-5/8 |
| Tank/Unit Height (mm) | 168.40 |
| Tank/Unit Height (Decimal Inch) | 6.6300 |
| Hose Length (mm) | 203.20 |
| Number of Lines | 1 |
| Includes | Adjustable Cold Air Gun Magnetic Base 5 Micron Auto-Drain Filter |
| Application | Cooling Molds & Molded Pieces Drill & Tool Sharpening Drilling Machining Milling Surface Grinding Turning |
| Cold Air Gun Model | 610 |
| Compressed air pressure (psig) | 80 - 100 |
| Inlet size (NPT pipe thread, inches) | 1/4 |
| Minimum Outlet Temperature, deg F (at 70 deg F inlet air) | -10 |
| Cooling Capacity (BTU/hr) | 900 |
| Air Consumption @ 100 psig (scfm) | 15 |
| Outlet Air Flow Rate (scfm) | 2 to 15 |
| Dimensions, inches | |
| Overall Length | 18 5/8 |
| Diameter | 1 3/4 |
| Nozzle Length | 8 |
| Flexible Nozzle Diameter | 1 |
| Outlet Diameter (ID) | 3/8 |
| Magnetic base diameter | 3 3/16 |
| Magnetic base height | 4 1/8 |
| Weight, lbs | 3.0 |
| Supply hose | |
| Diameter, inch | 3/8 |
| Max. recommended pipe/hose length | 25 |
| Recommended filter size | 25 scfm |
| Recommended filter model | 701S-24A |
For more info, visit www.p65warnings.ca.gov.
