Suburban Tool Compound Sine Plates
Brand: Suburban Tool Inc.-Taft Peirce Metrology- ID:
- 94346
Suburban Tool Compound Sine Plates
Compound Precision Steel Sine Plates
Features:
- Made of steel, hardened to Rc 58-60.
- Sizes up to 6" x 6" have 1/4-20 tapped holes. Larger sizes have 3/8-16 tapped holes.
- Part of the SineSet® System. Other products with the same part # suffix will bolt directly to these compound sine plates
- Each gage block roll has two 0.200" minute steps for setting small angles with standard gage block sets.
- Two locking straps that always remains below the top surface and two hardened & ground rails are standard.
Specifications:
| MODEL # | SineSet Series | L | W | H | C1 | C2 | SQUARE & PARALLEL | WT |
| SPC-44-S0 | S0 | 4" | 4" | 3-1/8" | 3" ±0.0002" | 3" ±0.0002" | 0.0002" | 12 |
| SPC-66-S1 | S1 | 6" | 6" | 3-1/8" | 5" ±0.0002" | 5" ±0.0002" | 0.0002" | 27 |
| SPC-612-S2 | S2 | 12" | 6" | 4-3/16" | 10" ±0.0002" | 5" ±0.0002" | 0.0003" | 71 |
| SPC-618-S2 | S2 | 18" | 6" | 5-3/8" | 15" ±0.0003" | 5" ±0.0002" | 0.0004" | 134 |
| SPC-812-S2 | S2 | 12" | 8" | 4-3/16" | 10" ±0.0002" | 5" ±0.0002" | 0.0003" | 93 |
| SPC-1212-S2 | S2 | 12" | 12" | 4-3/16" | 10" ±0.0002" | 10" ±0.0002" | 0.0003" | 137 |
| SPC-1218-S2 | S2 | 18" | 12" | 5-3/8" | 15" ±0.0003" | 10" ±0.0003" | 0.0004" | 278 |
For more info, visit www.p65warnings.ca.gov.
