Suburban Round Magnetic Chuck, Standard Pole, 5-1/2" dia. - RMC-5
Brand: Suburban Tool Inc.-Taft Peirce Metrology- SKU:
- RMC-5
- ID:
- 105102
| Pole Spacing | Standard |
| Diameter | 5-1/2" |
| Height | 3" |
$950.00
Suburban Round Magnetic Chuck, Standard Pole, 5-1/2" dia. - RMC-5
- Made in U.S.A.
- For efficient holding of magnetic work pieces on grinders, lathes, and other machines with rotating spindles.
- Permanent, ceramic magnets provide superior holding power that never fades and require no electrical controls or collector rings.
- Thick top plates are laminated from steel and stainless steel, then furnace brazed into one solid piece and precision ground.
- Top plate can be drilled, tapped or machined to three-fourths of its thickness (approx. 5/8"), if necessary, to allow the use of dowel pins or other mechanisms as locating devices.
- Back surface of aluminum chuck body has Tapped Holes (D) and a Turned Counterbore (B) for convenient mounting to your machine.
- "Partial-On" for holding parts prone to distortion.
- Removable on-off handle included with each chuck.
- All models except 5-1/2" dia (RMC-5) which uses the swing-type on-off method, are sealed against water and other elements.
STANDARD POLE: 1/4" poles and 1/8" separators produce deep flux lines for holding large and thick parts. (RMC-15 and RMC-20 have 3/8" poles and 3/8" separators).
FINE POLE: 1/8" poles and 1/8" separators produce shallow flux lines for holding small and thin parts.
| STANDARD POLE | ||||||
| MODEL # | Diameter (A) | Counterbore Diameter (B) |
Bolt Circle (C) | Tapped Holes (D) | Height (E) | WEIGHT |
| RMC-5 | 5-1/2" | 3" x 1/8" | 4" | (4) 1/4-20 | 3" | 15 lbs. |
See all Suburban Round Magnetic Chucks
For more info, visit www.p65warnings.ca.gov.
