Suburban Magna-Sine Magnetic Compound Sine Plates
Brand: Suburban Tool Inc.-Taft Peirce Metrology- ID:
- 326678
Suburban Magna-Sine Magnetic Compound Sine Plates
- MAGNA-SINE™ magnetic sine plates are equipped with extremely powerful ceramic magnet chucks. Having stationary magnets in the top plate and a movable magnet core, these chucks provide an average holding power of up to 100 pounds per square inch. This is nearly twice the holding power of a standard chuck!
- The chucks provide maximum holding of both small & large parts due to a combination fine / standard pole spacing.
- All but the chuck is made of steel, hardened to Rc 58-60.
- The swivel block provides full face contact with gage blocks keeping them securely in place.
- The gage block & hinge rolls are ground and lapped for straightness and roundness.
- An exclusive locking device inside the hinge roll provides a positive lock with an expanding action. Both screws lock toward the front of the unit, pulling the top plate down on the set-up gage blocks without distortion.
- The angular accuracy is guaranteed to be within 5 seconds of arc up to 15°, 10 seconds up to 30° and 15 seconds up to 45°.
- Side and back rails are included.
- Available hinged as STANDARD (as shown) or OPPOSITE-HAND.
- Made in U.S.A.
For more info, visit www.p65warnings.ca.gov.
Item Number | Description | Price | Quantity | |||||||
---|---|---|---|---|---|---|---|---|---|---|
A-5-MS | Magna-Sine Magnetic Compound Sine Plate | 6-1/2" | 6-1/2" | 5-1/4" | 5" ±0.0002" | 5" ±0.0002" | 0.0002" | 45 lbs. | $ 6,295.00 | |
A-15-MS | Magna-Sine Magnetic Compound Sine Plate | 18-1/4" | 6-3/4" | 6-7/8" | 15" ±0.0002" | 5" ±0.0002" | 0.0004" | 200 lbs. | $ 16,495.00 | |
A-10-MS | Magna-Sine Magnetic Compound Sine Plate | 12-1/2" | 6-1/2" | 6-1/8" | 10" ±0.0002" | 5" ±0.0002" | 0.0003" | 100 lbs. | $ 7,995.00 |