Starrett Surface Gages
Starrett Surface Gages are designed for a wide variety of uses. This is a basic tool for machinists and toolmakers. The main uses are for accurately scribing lines, transferring measurements and for probing surfaces in inspection work.
- Finest full-size surface gage
- Stable steel base is fully hardened, ground and nicely finished
- Four frictionally held gage pins that add versatility for referencing the tool
- Smaller base and spindle than other surface gages and is designed for lighter work
- Two frictionally held gage pins in the steel base which can be pushed down and used against the edge of a surface plate or T-slot for linear work
- Weighs only ten ounces (.28kg.) and takes up very little space in a toolbox
- Only 1-3/8" (35mm) high, including the lower sleeve in the rocker arm
- Scriber has a 3/32" (2.4mm) diameter and is 3-1/4" (82mm) long
- Full-size surface gages with attractive finish
- Two frictionally held gage pins in the steel base which can be pushed down and used against the edge of a surface plate or T-slot for linear work
For more info, visit www.p65warnings.ca.gov.
| Item Number | Description | Base Size | Price | Quantity |
|---|---|---|---|---|
| 57D | Starrett Full Size Surface Gage 12" & 18" Spindle Length | 3-3/4 x 3-3/8" | $ 369.95 | |
| 57C | Starrett Full Size Surface Gage 12" Spindle Length | 3-3/4 x 3-3/8" | $ 359.95 | |
| 57B | Starrett Full Size Surface Gage 9" & 12" Spindle Length | 3 x 2-9/16" | $ 299.95 | |
| 56C | Starrett Small Surface Gage 7" Spindle Length | 2" x 1-1/2" | $ 439.95 | |
| 257C | Starrett Surface Gage 12" Spindle Length | 3-1/2 x 3-3/16" | $ 399.95 | |
| 56B | Starrett Small Surface Gage Two 4" & 7" Spindle Length | 2" x 1-1/2" | $ 409.95 | |
| 257B | Starrett Surface Gage 9" & 12" Spindle Length | 2-7/8" x 2-3/8" | $ 349.95 | |
| 257D | Starrett Surface Gages 12" x 18" Spindle Length | 3-1/2" x 3-3/16" | $ 399.95 |
