Starrett Attachments for 708, 709, and 811 Test Indicators

Starrett Attachments for 708, 709, and 811 Test Indicators

Attachments for use on Dial Test Indicators 708, 709 and 811.

Dovetail Body Clamp

PT22429: 3/16" (4.8mm) diameter rod. For use in chucks, collets or surface gage snugs.

Tool Post Holder

PT11770A: 1/4" x 1 5/16" (6.3 x 33mm) post and 1/4" x 1/2" (6.3 x 12.7mm) shank. For use in tool posts or in height gages.

Swivel Post Snug with Dovetail Indicator Clamp

PT22428: Will fit over spindles and posts 3/32-1/4" (2.4-6.3mm). Can be used directly on our 252 Height Transfer Gage and our 657 Magnetic Base Holders. It is frequently used on the 1/4" (6.3mm) rod of the Snug and Rod Unit PT22430.

Snug and Rod Unit

PT22430: This unit consists of a snug (PT18724) with two 4" (100mm) long rods, one a 1/4" (6.3mm) diameter, the other a 3/8" (9.5mm) diameter. It is generally used with an indicator attached to PT22428 Swivel Post Snug which slides onto the 1/4" (6.3mm) diameter rod.

The 3/8" (9.5mm) rod will fit into the 252 and 657H Gage Holders. It also has the ability to be held in chucks and adjusted to a wide range of heights and diameters.

Metric Snug and Rod Unit

PT27171: This unit consists of a snug with two 100mm (4") long rods, one having a 6mm (.236") diameter, the other an 8mm (.315") diameter.

Indicator Axial Support

PT26007: This triple-hinged indicator holder is designed to mount dovetail indicators (such as our 708, 709, and 811 Indicators). By using a rod through the 3/16" (4.7mm) mounting hole, it will also accommodate test indicators such as our 711 Indicator. Overall length is approximately 5-1/4" (133mm), shank size is 3/8" (9.5mm).

Height Gage Attachment

711-49: 1/8" x 5/16" (3 x 8mm) shank. This is used for 250, 750, 751 Height Gages, and 995 Planer and Shaper Gage.

Height Gage Attachment

711-35: 3/16" x 3/8" (4.8 x 9.5mm) shank. This is used for 255 Height Gage.

Indicator Attachment

PT99454: Dovetail clamping style. Replaces standard scriber. Provides means to attach dovetail equipped test indicators or electronic probes to height gages. Allows indicator to be used to ensure that the down pressure on the part is the same as the original set zero position.

Collet Adapters

PT28315: To be used with a 3/16" (4.7mm) diameter attachment for indicators such as PT22429 dovetail body clamp and PT07104F long and short arm attachments.

PT28316: Swivel Post Collet Adapter, for use on any dovetail test indicator.

*For more details on each item, copy the Item Number below into the search bar at the top of the page.