Starrett 790.1 Electronic Multi-Anvil Micrometers

Starrett 790 Electronic Multi-Anvil Micrometers

0-1"/0-25MM

This tool was a new development in micrometer design and patent is held by Starrett. This micrometer will handle a wide variety of measurements impossible to obtain with regular micrometers, such as measuring the wall thickness of tubing, cylindrical walls from a hole or slot to an edge, many hard-to-reach locations, and the thickness of screw heads, shoulder lengths, etc.

This micrometer can be furnished with .0001" graduations, but we recommend .001" or 0.01mm for easier and more accurate readings. The Starrett Company, with our years of experience, recommends this because the anvils on this type of tool are not backed up by a frame as in a regular micrometer and could bend slightly.

Readability Features

• Large LCD digital readout is easy to read and reduces errors
  
• Resolution – .00005" and 0.001mm
  
• Conventional inch or millimeter graduations standard
  
• Attractive no-glare black wrinkle finish on the frame
  
• Starrett no-glare satin chrome finish on thimble and sleeve

Accuracy and Long-Life Features

• One 3-volt battery furnished for over a year of normal usage
  
• Automatic OFF after 30 minutes of nonuse
  
• Tool is accurate to ± .0002" or ± 0.004mm

 Full-Function Action Features

• Instant inch/millimeter conversion
  
• "ME" millimeter model will turn on in the millimeter mode after installation of a new battery
  
• Measurement HOLD button
  
• Ability to zero tool at any position
  
• Ability to retain and return to the true zero reading of the micrometer
  
• PRESET button to install any reading at any position
  
• Ability to install minimum and maximum limits
  
• Output data to Starrett SPC Plus hardware and software and to PCs
  
• Works well with Starrett DataSure® Wireless Data Collection Systems

*For more details on each item, copy the Item Number below into the search bar at the top of the page.