Simatec Simatherm Induction Heater IH 240, 460V - IH-240-460V
Brand: Simatec- SKU:
- IH-240-460V
- ID:
- 336806
Simatec Simatherm Induction Heater IH 240, 460V
for heating very large size bearings up to 1200 kg
The IH 240 is designed to heat very large size bearings up to 1200 kg. A bearing of 445 kg weight may be heated up to 110°C in only 10 minutes.
The IH 240 is a stationary ground model. The transport of this heater is easily made possible with a forklift or a pallet truck.
Features:
- For rolling bearings weighing up to 1200kg (2646lb)
- For workpieces with inner diameter of 142 to 850mm (5.6 to 33.5in)
- Also included: 1 yoke, 1 temperature probe, 1 pair of protective gloves
- Available for voltages of 400, 460 and 575V
- Extremely simple operation thanks to the sliding yoke
- Support legs can be adjusted according to the size of the workpiece
About Simatherm Induction Heaters:
The best way to avoid unwanted stresses when assembling interference-fit parts is to heat the outer part just enough to produce a temporary clearance. Simatherm induction heaters allow this to be done precisely, evenly, quickly and efficiently. Other methods of heating are slower, less controlled and can cause more harm than good to bearings.
Advantages:
- Precise, even, quick heating
- There is no risk of damage (from excessive mechanical stress, open flames, dirty oil baths, excessively hot ovens and plates)
- Automatic demagnetization
- User friendly
- Increased operational safety
- Selectable power reduction for heating up smaller parts
Click to View More Information
Specifications:
| Type | IH 240 |
| Description | Induction heater for large and very large workpieces |
| Designation | IH 240/400 V (Art. 110.1601) IH 240/460 V (Art. 110.1602) |
| Voltage | 400-440 V 440-480 V |
| Frequency | 50 Hz 60 Hz |
| max. Amperage | 60 A 52 A |
| Power | 24 kVA 24 kVA |
| Max. weight of rolling bearing | 1200 kg (2646 lbs.) |
| Bore diameter | 142-850 mm (5.6-33.5 in) |
| Temperature range | 20-250°C (68-482°F) |
| Magnetic probe | Yes, type J |
| Accuracy (electronic) | ± 3 °C (37.4°F) |
| Range of time control | 0-60 minutes |
| Time setting in steps | 0.1 minutes |
| Maximum temperature (approx.) | 400 °C (752°F) |
| Variable power level | Yes: 50% |
| Automatic demagnetization | Yes |
| Residual magnetism | < 2A/0.4in |
| Coil diameter | 186 mm (7.3 in) |
| Size of operating area (W x H) | 330 x 355 mm (13 x 14 in) |
| Dimensions (L x W x H) | 750 x 400 x 935 mm (29.5 x 15.8 x 36.8 in) |
| Overall weight | 300 kg (661 lbs.) |
| Number of standard yokes | 1 |
| Standard yokes | 4 x 4 x 22.4 in for bearings with a bore diameter of at least 5.6 in |
| Core cross section | 100 x 100 mm (3.9 x 3.9 in) |
| Movable yoke | Sliding yoke |
| Cooling fan | - |
See all versions of the Simatec Simatherm Induction Heater IH 240
For more info, visit www.p65warnings.ca.gov.
