Simatec Simatherm Induction Heater IH 090, 400V - IH-090-400V
Brand: Simatec- SKU:
- IH-090-400V
- ID:
- 336793
Simatec Simatherm Induction Heater IH 090, 400V
Induction heater with fan cooling for small to medium-sized workpieces
for heating smaller to medium-sized rolling bearings up to 150 kg
The IH 090 is ideal for the heating of medium-sized bearings up to 150 kg. This series comes equipped with a swivel arm as well as three yokes in various sizes.
Thanks to its integrated air cooling system the IH 090 is built for repeated mounting and continuous use.
Features:
- For rolling bearings weighing up to 150kg (330 lbs.)
- For workpieces with inner diameter of 20 to 400mm (0.8 to 15.7 in)
- Also included: 3 yokes, 1 swivel arm, 1 temperature probe, 1 pair of protective gloves
- Available for voltages of 200, 400-460 and 500-575V
- Fan cooling for continuous operation
About Simatherm Induction Heaters:
The best way to avoid unwanted stresses when assembling interference-fit parts is to heat the outer part just enough to produce a temporary clearance. Simatherm induction heaters allow this to be done precisely, evenly, quickly and efficiently. Other methods of heating are slower, less controlled and can cause more harm than good to bearings.
Advantages:
- Precise, even, quick heating
- There is no risk of damage (from excessive mechanical stress, open flames, dirty oil baths, excessively hot ovens and plates)
- Automatic demagnetization
- User friendly
- Increased operational safety
- Selectable power reduction for heating up smaller parts
Click to View More Information
Specifications:
| Type | IH 090 |
| Description | Induction heater with cooling fan for continuous operation with small to medium workpieces |
| Designation | IH 090/400 V (Art. 110.1401) IH 090/575 V (Art. 110.1404) IH 090/200 V (Art. 110.1402) |
| Voltage | 400-480 V 575 V 200 V |
| Frequency | 50-60 Hz 50-60 Hz 50-60 Hz |
| max. Amperage | 16 A 16 A 25 A |
| Power | 6.4 -7.4 kVA 9.2 kVA 5 kVA |
| Max. weight of rolling bearing | 150kg (330 lbs.) |
| Bore diameter | 20- 400 mm (0.8-15.7 in) |
| Temperature range | 20-250°C (68-482°F) |
| Magnetic probe | Yes, type K |
| Accuracy (electronic) | ± 3 °C (37.4°F) |
| Range of time control | 0-60 minutes |
| Time setting in steps | 0.1 minutes |
| Maximum temperature (approx.) | 400 °C (752°F) |
| Variable power level | 5 levels: 20-40-60-80-100% |
| Automatic demagnetization | Yes |
| Residual magnetism | < 2A/0.4in |
| Coil diameter | 115 mm (4.6 in) |
| Size of operating area (W x H) | 145 x 205mm (5.7 x 8.1 in) optional (Art. 110.1403): 145 x 410 mm (5.7 x 16.1 in) |
| Dimensions (L x W x H) | 420 x 280 x 420mm (16.5 x 11 x 16.5 in) |
| Overall weight | 38 kg (83.3 lbs.) |
| Number of standard yokes | 3 |
| Standard yokes | 2.2 x 2.2 x 10.8 in for bearings with a bore diameter of at least 3.1 in 1.1 x 1.1 x 10.8 in for bearings with a bore diameter of at least 1.6 in 0.6 x 0.6 x 10.8 in for bearings with a bore diameter of at least 0.8 in |
| Core cross section | 55 x 55 mm (2.2 x 2.2 in) |
| Movable yoke | Swivel arm |
| Cooling fan | Yes |
See all versions of the Simatec Simatherm Induction Heater IH 090
For more info, visit www.p65warnings.ca.gov.
