Royal QG-65 Ultra-Precision Quick-Grip™ Hex Collet, 1-13/16" Size - 44724
Brand: Royal Products- SKU:
- 44724
- ID:
- 348187
| Size | 1-13/16" |
| Range | 1.781 - 1.844" |
$749.95
Royal QG-65 Ultra-Precision Quick-Grip™ Hex Collet
1-13/16" Size - 44724
- Smooth and serrated versions for round-bore models (all others smooth only).
- Industry-leading 0.062" gripping range covers a wide range of part diameters. Collets are ground to nominal size and have a range of +/- 0.031".
- Parallel-grip ensures full-length part contact for maximum grip force, rigidity, and accuracy.
- Can be counter-bored for increased part capacity up to 3.40" – see picture for details.
- Quick-ship specials available for custom shapes.
- Can utilize manual and pneumatic changing tools.
QG-65 Capacity:
- Bar Diameter: 2.66" (65.8mm)
- Slug Diameter: 3.40" (86.4mm)
Ultra-Precision Quick-Grip™ Collets
These Extremely Advanced Collets Will Revolutionize Your Workholding
- Industry-leading 0.062" Gripping Range – greater than other quick-change collets on the market and more than 12X that of traditional spring collets.
- Royal Quick-Grip Collets are precision-ground to nominal size, with a gripping range of +/- 0.31" to handle undersized/oversized stock.
- Example – a 1/2" collet is ground to 0.500" dia., and can hold any part ranging in size from 0.469" – 0.531" dia. - Ultra-Precision Accuracy – 0.0002" TIR or better guaranteed on round-bores. Total system accuracy (chuck + collet) guaranteed to 0.0004" or better.
- All Royal Quick-Grip™ Collets are designed for minimal projection beyond the chuck face (≤ 0.020") for optimum rigidity and machine work-zone utilization.
- All models have a smooth gripping surface, but round-bores are also available from stock in a double-serrated version for very aggressive first-op machining.
- Vulcanized rubber between the hardened steel collet segments provides outstanding protection against coolant and chip penetration, and Royal's advanced vulcanization process carries a lifetime guarantee against failure.
- Collets can be counter-bored for increased capacity.
- S-type master collets available for QG-65 and QG-80 chuck models.
- Royal Quick-Grip™ Collets are compatible with some other brands of quick-change chucks, but note that the QG-80 and QG-100 models have a six-slot design (for increased gripping torque) that requires the use of a Royal installation tool. Call to verify compatibility.
Specifications:
| Collet Model | Number of Slots | Round | Hex | Square | |
| Max. Thru Capacity | Max. Capacity when Counter-Bored** | Max. Thru Capacity | Max. Thru Capacity | ||
| QG-65 | 3 | 2.66" | 3.40" | 2.28" | 1.78" |
**Counter-boring collets is a special operation and it is important to note that the maximum counter-bore diameter varies with depth.
For more info, visit www.p65warnings.ca.gov.
