Royal 5C, 16C, & 3J Manual Collet Fixtures
Features:
- Opened and closed via an internal cam mechanism.
- Accu-Length™ operation – collet and workpiece position remains fixed for precise length control.
- Can be used in both stationary and rotary table applications. Caution – not for use on lathes or grinders above 5 rpm!
- Special model 62004 bolts directly to Haas HRT-110* and other small indexers. Note – cam bolt is recessed on this model.
- All other models configured for both four and six-slot mounting – 4.125" bolt circle diameter.
- All models include cam wrench.
Specifications:
| Item Number | Model | Capacity | Type | A | B | C | D | E | F |
| 62002 | 5C | 1-1/16" | Type 1 | 3.37 | 2.50 | 4.95 | 3.50 | 1.15 | 0.75 |
| 62004 | 5C (for HRT-110)* | 1-1/16" | Type 2 | 4.20 | 2.50 | - | 3.50 | 1.15 | - |
| 62006 | 16C | 1-5/8" | Type 2 | 4.95 | 3.35 | - | 4.63 | 1.50 | - |
| 62008 | 3J | 1-3/4" | Type 2 | 4.95 | 3.35 | - | 4.13 | 1.00 | - |
* Haas and HRT-110 are registered trademarks of Haas Automation, Inc.
For more info, visit www.p65warnings.ca.gov.
