Proxxon Micro Mill FF 230
The MICRO Mill FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic. The headstock swivels through 360°, indicated on a scale. Height is adjustable. One revolution equals 1/32" (1mm) travel, 1 division equals .002" (0,05mm). The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds.
The machine comes with three collets of 15/64", 5/16" and 25/64" (6, 8 and 10mm). The solid table has a size of 10 5/8" x 3 5/32" (270 x 80mm) and is T-slotted to 15/32" x 15/64" x 13/64" (the MICROMOT norm of 12 x 6 x 5mm).
Technical Data:
| Speeds | 280 - 550 - 870 - 1,200 - 1,500 - 2,200 RPM |
| Table Size | 10 5/8" x 3 5/32" (270 x 80mm) |
| Column Size | Ø 1 3/8" x 15 3/4" long (35 x 400mm) |
| X-Y Travel | 6 11/16" x 2 9/16" (170mm x 65mm) |
| Overall Height | 20" (500mm) |
| Volts | 110 - 120V AC, 60Hz |
| Weight | 41 lb. (17kg) |
Important: For best results when milling, it is recommended to lock the headstock. This is easily done via the FF 230's lock levers.
For more info, visit www.p65warnings.ca.gov.
| Item Number | Description | Price | Quantity |
|---|---|---|---|
| 24-144 | Proxxon 5 Piece Collet Set for PF 230 | $ 149.95 | |
| 24-106 | Proxxon Compound Table KT 230 | $ 471.50 | |
| 24-620 | Proxxon Milling Cutter Set 15/64" - 13/32" | $ 99.95 | |
| 24-610 | Proxxon Milling Cutter Set 5/64" - 13/64" | $ 79.95 | |
| 27-116 | Proxxon Milling Cutters | $ 39.95 | |
| 24-255 | Proxxon Precision Machine Vise PM 60 | $ 129.95 | |
| 24-262 | Proxxon Precision V-Blocks (2 Pieces) | $ 89.95 | |
| 24-322 | Proxxon Splash Guard & Chip Collecting Tray for Micro Mill FF 230 | $ 299.95 | |
| 24-257 | Proxxon Step Clamp Set | $ 64.95 | |
| 24-256 | Proxxon Clamping Jaw Set | $ 39.95 | |
| 24-140 | Proxxon Fine Feed Handle | $ 169.95 | |
| 34-108-P | Proxxon Micro Mill FF 230 | $ 1,630.00 |