MPI Rare Earth Permanent Magnetic Compact Milling Chuck, 12" x 20" - CMC-300500-REN

MPI Rare Earth Permanent Magnetic Compact Milling Chuck, 12" x 20" - CMC-300500-REN

• Compact dimensions and a high holding force – 160N/cm² / 232lbs/in²
• High use-value and long life span thanks to an unparalleled regrinding limit for the top plate up to 10 mm
• Holding surface with uniform distribution of the magnetic force right up to the edges
• Waterproof design
• Min. workpiece size: 15 x 15 x 6mm/ 0.59 x .059 x 0.24"
• Transverse poles
• 10mm/ 0.39" regrinding limit
• Pole pitch T15 11+4mm – steel/epoxy resin
• One (1) year warranty for the magnetic system

How It Works:

This type of magnetic chuck is a manually operated permanent magnetic chuck. It is turned ON or OFF by turning the actuator shaft 180 degrees by means of an Allen key. The chuck is independent of any external power supply during operation. This offers safety, constant holding power, accuracy and no heat development causing expansion.

The MPI Rare Earth Compact Milling Chuck is used for milling, drilling or heavy grinding of relatively small workpieces that require a significant holding force and stability required for clamping.

Important Parameters:

• Application: Milling
• Technology: Permanent
• Chuck dimensions: from 6×10"
• Holding force: 160 N/cm² / 232 lbs/cm²
• Minimum workpiece size: 25mm x 25mm x 6mm / .984" x .984" x .236"
• Regrinding limit: 10mm / .393"
• Pole pitch: T15mm – 11mm+4mm / T .590" – .433"+.157" (steel/epoxy)
• Poles: Transverse

Additional Information:

• Also available with mounted top plate with steel and brass lamellae

Use:

• Milling, drilling, planing, heavy duty grinding

Specifications:

See all MPI Rare Earth Permanent Magnetic Compact Milling Chucks