MPI Electromagnetic Chuck Control Unit, 630 Watt Capacity, with U19 Remote Control - EMCU-630W
Brand: MPI Magnetic Products, Inc.- SKU:
- EMCU-630W
- ID:
- 604847
MPI Electromagnetic Chuck Control Unit, 630 Watt Capacity, with U19 Remote Control - EMCU-630W
- Clamping force control for higher accuracy and colder operation
- Demagnetization of the chuck and workpiece for easy unclamping
- Powerful control system with a microprocessor
- 150W and 630W Models Stock, all others special order
- Choose a design – metal box (IP54 stock) or panel (IP00 special order)
- One (1) year warranty
How It Works:
Electromagnet Chuck Control Units are designed to magnetize and demagnetize electromagnetic devices such as electromagnetic chucks and lifters. Magnetization consists of supplying a continuous DC output voltage to the device. Demagnetization cycles consist of a specific combination of positive and negative voltage pulse(s). The workpiece material may retain some residual magnetism due to its chemical and magnetic properties. The control units are designed to operate any 110VDC magnetic device within the specified wattage.
MPI's Electromagnet Control Unit features an SR interlock safety contact. By using a potential free relay contact driven by the machine's PLC, the controls can be enabled or disabled. The safety contact closes when the magnetic device is properly magnetized and should be used to enable the operation of the connected machine. A 24V signal on E-X3-10 of the control board provides a warning signal to disable the control unit. The safety control unit feature should be engaged during machining or transport.
For use with:
- MPI Electromagnetic Transverse Fine Pole Surface Grinding Chucks
- MPI Electromagnetic Longitudinal Fine Pole Surface Grinding Chucks
Specifications:
| Part Number | EMCU-630W |
| Description | Electromagnet Control Unit 630-watt capacity, 230 volt with U19 remote control |
| Main AC Input Voltage (Vac) | 200-230 |
| Output DC Voltage (Hz) | 110 |
| Mains Frequency (Hz) | 50/60 |
| Operating Temperature (ºF) | 32-122 |
| Maximum Relative Humidity | 90% |
| Maximum Working Altitude (ft) | 3,280 |
| Cabinet Protection Class | IP66 |
| Required Circuit Breaker | 10A C Curve |
| Required Cable (*) | 3 G 2.5 |
| Remote Control | Yes |
| Embedded Control | No |
*Cable between electrical grid and control unit is not supplied. Make sure to follow required cable specifications.
| Part Number | Dimensions (Inches) | ||||||||||
| A | B | C | D | E | F | G | H | I | J | K | |
| EMCU-630W | 12 | 10 | 6 | 9.8 | 7.9 | 10.3 | 9.8 | 7.9 | 8.9 | 6.9 | 10.3 |
For more info, visit www.p65warnings.ca.gov.
