Mitutoyo IDC Digimatic Indicator 543-392, Lug Back, 0.5"/12.7mm - 11-660-8

Mitutoyo IDC Digimatic Indicator 543-392
Lug Back, 0.5"/12.7mm

• Switchable resolutions on models noted below
• Preset, zero-set, inch/metric, ±counting, GO/±NO GO, and f(x)=Ax calculation functions increase versatility
• Function lock
• 7000 Hour battery life
• Absolute encoder ensures all settings are maintained for the life of the battery
• Data hold/Data output button
• Extra large LCD with 0.443" character height
• Stem diameter: 3/8"
• Thread size: #4-48

Features:

• Similar in size to Series 2 dial indicators
• As compact as standard Series 2 dial indicators
• Large, easy-to-read LCD
• GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters.
• The positive/negative count resulting from the spindle’s up/down movement can be toggled
• Internal calculations using the simple formula of [F(x)=Ax)] are available
• Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle "Absolute Position" from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
• The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading
• With SPC data output

Technical Data:

• Accuracy: Refer to the list of specifications.
• Resolution: 0.01mm, 0.001mm, .0005"/0.01mm, .0001"/0.001mm or .00005"/0.001mm
• Display: LCD
• Length standard: ABSOLUTE electrostatic capacitance type linear encoder
• Max. Response speed: Unlimited
• Measuring force: Refer to the list of specifications
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 5,000 hours under normal use
• Dust/Water protection level: IP42 or IP53 (dust-proof type)

Function:

• Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power ON/OFF, Data output,inch/mm conversion (on inch/metric models only) 
• Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error
• Internal calculations using the simple formula of [F(x)=Ax)] are available

Optional Accessories:

• 905338: SPC cable (40" / 1m) 
• 905409: SPC cable (80" / 2m) 
• 21EZA198: Spindle lifting lever (ISO/JIS type)* 
• 21EZA199: Spindle lifting lever (ANSI/AGD type)* 
• 21EZA105: Spindle lifting knob (12.7mm/5"ISO/JIS type)**
• 21EZA150: Spindle lifting knob (12.7mm/5" ANSI/AGD type)**
• 21EZA197: Spindle lifting knob (25.4mm/1",50.8/2" models)
• 21EZA200: Spindle lifting knob (50.8mm/2")
• 540774: Spindle lifting cable (stroke: 1"/25.4mm)
• 02ACA571: Auxiliary spindle spring for 25mm/1" models***
• 02ACA773: Auxiliary spindle spring for 50mm/2" models***

* Can be used on 12mm/.5" models only.
** Not available for low measuring force models.

Specifications:

See all Mitutoyo IDC Digimatic Indicators