Mitutoyo Bore Gages for Blind Holes, Series 511
New model measures blind-hole diameter with high accuracy and high durability
Features:
- Capable of ID (inside diameter) measurement close to the bottom of a hole
- Pendulum guide structure improves sliding
- Carbide contact faces for durability
- Grip is large and hollow to reduce effect of body heat on high-accuracy measurements
- Extension rods (optional) can be attached for measuring deep holes
- A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting the gage before making a measurement.
- Alternate indicators may be used in place of those recommended*
* Some indicators and protection covers cannot be used with these bore gages. Contact us if considering the use of Dial or Digimatic indicators other than the recommended models.
Specifications
Metric:
| Order No. | 511-415 | 511-425 | 511-435 | 511-416 | 511-426 | 511-436 | |
| Measuring range | 15 - 35 mm | 35 - 60 mm | |||||
| Indicator included | - | 2046SB | 2109SB-10 | - | 2046SB | 2109SB-10 | |
| Accuracy | Wide-range accuracy | 4μm | |||||
| Repeatability | 1μm | ||||||
| Adjacent error | 1μm | ||||||
| Effective stroke of contact rod | 1.2mm | ||||||
| No. of anvils | 11 | 6 | |||||
| No. of replacement washers | 1 | 4 | |||||
| Order No. | 511-417 | 511-427 | 511-437 | |
| Measuring range | 50 - 150 mm | |||
| Indicator included | - | 2046SB | 2109SB-10 | |
| Accuracy | Wide-range accuracy | 4μm | ||
| Repeatability | 1μm | |||
| Adjacent error | 1μm | |||
| Effective stroke of contact rod | 1.2mm | |||
| No. of anvils | 11 | |||
| No. of replacement washers | 4 | |||
Inch:
| Order No. | 511-418 | 511-428 | 511-438 | 511-419 | 511-429 | 511-439 | |
| Measuring range | 0.6 - 1.4" | 1.4 - 2.4" | |||||
| Indicator included | - | 2922SB | 2923SB-10 | - | 2922SB | 2923SB-10 | |
| Accuracy | Wide-range accuracy | 0.00016" | |||||
| Repeatability | 0.00004" | ||||||
| Adjacent error | 0.00004" | ||||||
| Effective stroke of contact rod | 0.047" | ||||||
| No. of anvils | 11 | 6 | |||||
| No. of replacement washers | 1 | 4 | |||||
| Order No. | 511-420 | 511-430 | 511-440 | |
| Measuring range | 2 - 6" | |||
| Indicator included | - | 2922SB | 2923SB-10 | |
| Accuracy | Wide-range accuracy | 0.00016" | ||
| Repeatability | 0.00004" | |||
| Adjacent error | 0.00004" | |||
| Effective stroke of contact rod | 0.047" | |||
| No. of anvils | 11 | |||
| No. of replacement washers | 4 | |||
Notes:
1. A 10mm (.4") sub-anvil is supplied with 511-415/425/435/418/428/438 and a 50mm (2") sub-anvil is supplied with 511-417/ 427/437/420/430/440.
2. It is not permissible to use a sub-anvil other than the standard accessory, or widen a measuring range by using multiple sub-anvils.
(The measurement accuracy in such cases is not guaranteed.)
Recommended dial indicators:
Metric models:
- 2046SB (0.01mm)
- 2972TB (0.01mm - One revolution type)
- 2109SB-10 (0.001mm)
- 2900SB-10 (0.001mm - One-revolution type
Inch models:
- 2922SB (.0005")
- 2977TB (.0005"- One-revolution type)
- 2923SB-10 (.0001")
- 2910SB-10 (.0001"- One-revolution type)
Recommended digimatic indicators:
- Metric models: 543-310B (0.001mm)
- Inch models: 543-312B (0.001mm/.00005")
Note: Indicators equipped with rubber bellows, such as waterproof types, cannot be used.
For more info, visit www.p65warnings.ca.gov.
