Mitutoyo ABSOLUTE Digimatic Indicator ID-C112CEX, 0.5"/12.7mm, Flat Back, Low Measuring Force - 543-396B
Brand: Mitutoyo- SKU:
- 543-396B
- ID:
- 312713
| Model | ID-C112CEX |
| Range | 0.5" / 12.7mm |
| Accuracy | 0.0001" |
| Contact Point | Stem dia 3/8", #4-48 UNF Thread |
| Measuring Force | Less than 0.4, 0.6, 0.7N |
| Resolution *Switchable | *0.00005" / 0.001mm |
| Type | ANSI/AGD |
$753.00
Mitutoyo ABSOLUTE Digimatic Indicator ID-C112CEX, 0.5"/12.7mm, Flat Back, Low Measuring Force - 543-396B
ID-C Series 543 - Standard Type
Features:
- Similar in size to Series 2 dial indicators
- As compact as standard Series 2 dial indicators
- Large, easy-to-read LCD
- GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters.
- The positive/negative count resulting from the spindle's up/down movement can be toggled
- Internal calculations using the simple formula of [F(x)=Ax)] are available
- Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle "Absolute Position" from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
- The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading
- With SPC data output
Technical Data:
| Accuracy | Refer to the list of specifications. |
| Resolution | 0.01mm, 0.001mm, .0005"/0.01mm, .0001”/0.001mm or .00005”/0.001mm |
| Display | LCD |
| Length standard | ABSOLUTE electrostatic capacitance type linear encoder |
| Max. Response speed | Unlimited |
| Measuring force | Refer to the list of specifications Low Measuring Force Models: 543-396B |
| Battery | SR44 (1 pc.), 938882 |
| Battery life | Approx. 5,000 hours under normal use |
| Dust/Water protection level | IP42 or IP53 (dust-proof type) |
Function:
- Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power ON/OFF, Data output,inch/mm conversion (on inch/metric models only)
- Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error
- Internal calculations using the simple formula of [F(x)=Ax)] are available
See all Mitutoyo ABSOLUTE Digimatic Indicators ID-C Series 543, Standard Type
For more info, visit www.p65warnings.ca.gov.
