Models with or without compressed air (pneumatic) lifter or vacuum retraction
Measuring pin mounted in ball-bearing guide
High linearity over the entire measuring range
Excellent electromagnetic shielding (EMC)
All probes can be easily converted from axial to radial by mounting a slip-on cap (included)
Chemical resistance data: resistant to oil, gasoline, water and aliphatics. Moderately resistant to acids, bases, solvents and ozone
Included:
Instruction manual
Cap for radial cable output
Spanner for preliminary stroke setting
Technical Data:
Measuring range from
-5 mm
Measuring range up to
5 mm
Distance of lower stop MAX
-5.3 mm
Distance of upper stop MAX
5.3 mm
Lifter / retraction
Compressed air retraction (max. 1 bar)
Measuring force
Depending upon air pressure
Sensitivity deviation
0.30%
Repeatability fw (µm)
0.2 µm
Hysteresis fu (µm)
1 µm
Linearity deviation within +/- 2,0 mm
4 µm
Linearity deviation within +/- 5,0 mm
20 µm
IP protection category
IP 64
Cable length
2.5 m
Working temperature
20 °C
Working temperature MIN
10 °C
Working temperature MAX
55 °C
Operating temperature Min
-10 °C
Operating temperature Max
80 °C
Temperature coefficient
0.15 µm/°C
Compatibility
Mahr VLDT
Dimensions:
Connection thread g
M 2,5
Dimension j
3.6 mm
Dimension k
9 mm
Dimension l
8.3 mm
Dimension m
12.5 mm
a
125.7 mm
b
28 mm
c
34 mm
d
6 mm
e
9.2 mm
f
8 mm
h
14 mm
i
26.5 mm
WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.
