Kurt DoveLock Dovetail 5 Axis Vise - DTR20
Brand: Kurt Manufacturing Workholding Solutions- SKU:
- DTR20
- ID:
- 323980
$995.00
Kurt DoveLock Dovetail 5 Axis Vise - DTR20
The DoveLock™ DTR20 5 axis dovetail vise from Kurt Workholding is designed to handle the toughest machining operations. Manufactured from pre-hardened 4140 steel, our DTR20 dovetail vise maintains part rigidity and minimizes deflection/clamp creep during high-pressure machining.
The unique design of this dovetail workholding device, which positions the clamping screw high up in the clamping envelope, is the key to deflection reduction. Additional anti-deflection control is achieved via the movable jaw slide which is retained within the stationary jaw.
Features:
- DoveLock™ dovetail vise for 4 and 5 axis CNC machining with access to five sides of the workpiece
- Manufactured from pre-hardened 4140 steel, the DoveLock maintains part rigidity and minimizes deflection or clamp creep when under high machining pressure
- Reversible models allow for a wide range of dovetail widths
- High clamping screw location reduces deflection
- Movable jaw slide is retained within the stationary jaw and creates more anti-deflection control
- Embedded locating pin keeps part location accurate when applying side load pressure
- Models available: Standard model DT20. Reversible jaw models DTR20 and DTR10
- Mounting base has pre-configured hole pattern to fit most machines
- Easy part prep requires only 1/8" of material to hold workpiece in place
- Movable and stationary jaws are matched pairs
- Lifetime Iron Clad Warrant
| CLAMP FORCE DT20 DTR20 | |
| Inch Pounds | Pounds of Force |
| 80 | 1,000 |
| 160 | 2,000 |
| 240 | 3,000 |
| 320 | 4,000 |
For more info, visit www.p65warnings.ca.gov.
