JET 15" Variable Speed Floor Model Drill Presses
These JET Drill Presses use a variable-speed motor with the stepped-pulley system, and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motor's fixed pulley and the output shaft's variable pulley, changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.
Features:
- Full bearing support on quill for maximum spindle stiffness
- Handwheel speed adjustment of 400 to 5,000 RPM
- Large 2-1/4" quill for greater accuracy
- 3" column diameter for maximum head support
- 6" stroke for deep hole application
- Accurate depth stop for precice hole depths
- 1/2" drill chuck and arbor included
- Safety collar
Specifications:
| Item Number | 354550 | 354551 |
| Model | J-A5816 | J-A5818 |
| Style (Type) | Variable | Variable |
| Drills to Center of Circle | 15" | 15" |
| Drilling Capacity Cast Iron | 5/8" | 5/8" |
| Drilling Capacity Mild Steel | 1/2" | 1/2" |
| Distance Column to Spindle | 7-1/2" | 7-1/2" |
| Number of Spindle Speeds | Variable | Variable |
| Range of Spindle Speeds (RPM) | 400 - 5,000 | 400 - 5,000 |
| Column Diameter | 3" | 3" |
| Spindle Taper (In. x TPI) | MT-2 | MT-2 |
| Spindle Travel | 6" | 6" |
| Spindle Distance to Base | 44-1/2" | 44-1/2" |
| Spindle Distance to Table (Max.) | 25-3/4" | 25-3/4" |
| Table Travel | 16-3/4" | 16-3/4" |
| T-Slots Number and Size | 2 and 1/2" | 2 and 1/2" |
| T-Slot Centers | 5-5/16" | 5-5/16" |
| Table Size (L x W) | 15" x 18" | 15" x 18" |
| Work Table Weight Capacity | 90 lbs. | 90 lbs. |
| Base Dimensions | 20-7/16" x 14-3/16" | 20-7/16" x 14-3/16" |
| Base Work Table | 12-1/8" x 11-13/16" | 12-1/8" x 11-13/16" |
| Base Slots Number & Size | 2 and 1/2" | 2 and 1/2" |
| Motor (HP) | 1 HP, 115/230V, 1-Phase | 1 HP, 230/460V, 3-Phase Prewired (V.)230V, **SURCHARGE APPLIES FOR 460V RE-WIRE |
| Overall Dimensions (L x W x H) | 30" x 20" x 71" | 30" x 20" x 71" |
| Weight | 426 lbs. | 426 lbs. |
View the Instruction Manual
For more info, visit www.p65warnings.ca.gov.
