GS Tooling HSK100A 1-1/4" x 4.72" Shrink Fit Holder w/ Coolant Ports - 546-460
Brand: GS Tooling- SKU:
- 546-460
- ID:
- 457674
$576.83
GS Tooling HSK100A 1-1/4" x 4.72" Shrink Fit Holder w/ Coolant Ports - 546-460
- Unsurpassed Accuracy: Concentricity of ≤.0001” (3μm) with tool shrunk in holder.
- Coolant Ports: Each holder has 4 coolant ports in the nose to ensure coolant gets right to the tool.
- Max Gripping Torque: Tool is gripped 360° along the entire length of bore producing very high gripping torque, preventing chatter.
- Increased Production: Decrease down time - the total time elapsed to remove one cutting tool and insert another is less than 10 seconds.
- Balanced: GS follows the strictest balance standards. Our holders are pre-balanced G2.5 up to 30,000rpm
- Extended Holder Life: With double tempered tool steel construction, reduced centrifugal forces, minimized bore contamination, and minimized chatter, a GS Shrink Fit Toolholder should far outlast a standard end mill holder.
- Chip load distributed evenly along cutting edge of tool which results in longer tool life
- Short projections are possible because no mechanical clamping devices are used. This results in greater rigidity and resistance to bending.
- Since Shrink Fit toolholders have no moving parts they offer the greatest repeatability of any tool holding system on the market.
D1 | A | D2 | D3 | L |
1-1/4" | 4.72" | 1.73" | 2.09" | 2.28" |
For More GS Tooling HSK100A Shrink Fit Holders w/ Coolant Ports Click Here
![Warning Icon](https://cdn11.bigcommerce.com/s-6vccrv70fh/images/stencil/original/image-manager/warning-icon-new.png?t=1709211126)
For more info, visit www.p65warnings.ca.gov.
![GS Tooling HSK100A 1-1/4" x 4.72" Shrink Fit Holder w/ Coolant Ports - 546-460 GS Tooling HSK100A 1-1/4" x 4.72" Shrink Fit Holder w/ Coolant Ports - 546-460](https://cdn11.bigcommerce.com/s-4s9liwcv/images/stencil/300x300/products/457674/578703/546450__59588.1633459339.jpg?c=2)