GMC Heavy Duty 33" x 120", 4-3/4” Spindle Bore Precision Gap Bed Lathe - GML-33120T
Brand: GMC- SKU:
- GML-33120T
- ID:
- 792480
$62,535.00
GMC Heavy Duty 33" x 120", 4-3/4” Spindle Bore Precision Gap Bed Lathe
- Meehanite casting – high performance cast iron
- ISO 9001 certified
- Large spindle bore 4-3/4"
- Heavy Duty spindle D1-11
- Heavy Duty main motor 15HP
- 2-speed tailstock
- 16 spindle speeds from 25-1,600 rpm
- 54 kinds of inch threads, and 54 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- One year warranty for parts
- Made in Taiwan
Standard Equipment:
- Free CARMAR DRO installed
- Rapid traverse on carriage on Longitudinal way
- Automatic kick-out longitudinal carriage stop system
- 12" 3-jaw chuck with set reversible jaws direct mount
- 20" Face plate
- 12" steady rest with roller jaws
- 5" follow rest with roller jaws
- 4-way tools post
- Foot brake
- Coolant system
- Halogen Work light and coolant system
- Removable gap
- 4-way tools post
- Splash guard on carriage
- Dead centers
- Reducing sleeve MT7/MT5 for spindle
- Thread chasing dial
- Tool box and leveling pads
Max. swing over bed | 33" |
Max. length of workpiece | 120" |
Max. swing over cross slide | 24" |
Max. swing in gap | 42" |
Width of Bed | 15-3/4" |
Effective length in gap to spindle | 9" |
Effective length in gap to chuck jaws | 4-1/2" |
Spindle bore | 4-3/4” (120mm), D1-11 |
Taper of spindle center | M.T.# 7 w/MT5 reducing sleeve |
Spindle speeds | 10-1,000 rpm / 12 steps |
Longitudinal feeds | 0.002-0.032 IPR, 35 kinds |
Cross feeds | 0.001-0.0094IPR, 35 kinds |
Inch threads | 2-56 TPI, 44 kinds |
Metric threads | 0.5-14mm , 24 kinds |
Module Threads | 0.4-7.0 mm , 17 kinds |
Max. travel of top slide | 8" |
Max. travel of cross slide | 13-1/2" |
Leadscrew length X TPI | 1-1/2" x 4TPI |
Diameter of tailstock quill | 3-1/2" |
Max. travel of tailstock quill | 7-1/2" |
Taper of tailstock quill center | M.T. #5 |
Main Motor | 15HP, 220V or 440V, 3 phase |
Amperage draw | 55Amp on 220V / 30Amp on 440V |
Coolant pump motor | 1/8 HP, 220V, or 440V, 3 phase, 3Gal coolant |
Machine Oil | #30 weight machine oil, 8 Gallons |
Overall dimensions, LxWxH | 186” x 50” x 76” |

For more info, visit www.p65warnings.ca.gov.
