GMC Finish Pro Dry Line Graining/Deburring/Finishing Machine - FP-2560T
Brand: GMC- SKU:
- FP-2560T
- ID:
- 792484
$21,900.00
GMC Finish Pro Dry Line Graining/Deburring/Finishing Machine - FP-2560T
- Computerized programmable material thickness control
- Motorized Table Lift, with digital readout
- Variable Speed Conveyor
- Conveyor Forward & Reverse
- Belt Safety Overtravel Switches
- Electronic Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to
Re-adjust the tracking system when running extremely out of parallel belts - 4-Jackscrew Table Support
- Double Infeed & Outfeed Pinch Rolls with protective guards
- Conveyor Belt Tracking System
- Safety System with Disc Brake. Air operated disc brakes to stop sanding head in
3-5 seconds in the even of loss of air pressure or activation of any emergency stop device - Table Height Digital Readout
- Load Meter indicates percentage of full motor loads
- Belt change door electrically interlocked for safety purpose
- Air tensioning of belt for accurate tensioning & compensation of belt stretch
- Quick release sanding head support for fast belt change
- Dust collection hood with 4” outlet is located adjacent to abrasive head in sanding area
Emergency stops from almost any point - Noise level bellows 80 dba
- Operation manual, control tags, danger signs, and warning labels in English on machine
- 208/230, 3-Phase, 440V/480V ,3phase is optional
- One year Industrial Warranty for parts
- We strongly recommend to use a good dust collector for the Finish Pro, otherwise, the warranty will be void.
- Made in Taiwan
Specifications:
- Max. Part Width: 24"
- Abrasive Belt Size: 25" x 60"
- Contact Roller Size: 5" Diameter
- Passline Height: 31" - 37"
- Thickness Capacity: 20 Ga. to Max. 5-1/8"
- Min. workpiece length: Min. 12" - Need a fixture for smaller parts
- Max. workpiece weight: 275 lbs.
- Conveyor Drive Speeds: 16-66 RPM
- Infeed Conveyor Length: 10"
- Dust Collector Capacity: 1,100 CFM
- Outlet of dust hood: 6"
- Main Motor: 10HP, 230V, 3-Ph.
- Conveyor Motor: 1HP, 230V 3-Ph.
- Table Lifting Motor: 1/4HP, 230V, 3-Ph.
- Amperage draw: 45A on 220V, 25A on 440V
- Machine Dimensions, LxWxH: 51" x 46" x 70"

For more info, visit www.p65warnings.ca.gov.
