Foredom Dual Handpiece Kit, Brushless 1/8" Collet Rotary + Hammer Handpiece - K.105318

Foredom Dual Handpiece Kit, Brushless 1/8" Collet Rotary + Hammer Handpiece - K.105318

• 1- Brushless rotary handpiece connects to Port B located in the back of the control box. It runs virtually vibration free with high torque throughout the entire speed range of 1,000-50,000 rpm. See additional specs below.
• 2- Hammer handpiece operates at 1,000 – 2,500 strokes per minute. Connects to Port A in the front of the control. Requires motor brushes HPL4-504 (spare motor brushes included) See additional specs below.
• Sophisticated control box with digital display, variable speed foot pedal, 2 handpiece cradles, and an extra fuse also included. See additional specs below.
• Overall Product Features-
• Two Year Limited Warranty
• Brushless handpiece motor design means carbon brushes NEVER need changing
• Maximum Torque or Watts Output 10 oz. in or 70mNm or 230W. Powerful even at minimum speeds
• Sealed housing eliminates dust, noise, and vibration
• Additional port for Brush Type Micromotor Handpiece:
• This brushless micromotor is ideal for various applications at high, medium and low speed.

HP4-817 Control Box and Front Panel LED Specifications and Features-

• 50/60 Hz, 100VA, 5.4″ wide, 9.1″ deep, 7″ high
• Dial speed control sets precise speed and torque
• Auto cruise, Forward or Reverse rotation, Dial or Foot speed control
• Digital display for precise speed and torque settings
• Built in overload protection
• Brushless micromotor handpiece connects to port on back side of control box
• Brush type handpiece connects to port in front.
• H.MH-150 Brushless Handpiece/Motor Specifications and Features –
• 6.3″ long, 1.06″ motor diameter, .75″ grip diameter, 8.4 oz/237.7 gr., 115 volt
• Ergonomic and brushless with long-lasting ceramic ball bearings
• Bur changes are quick and easy with a simple twist of the front section of the Handpiece

HPMH-011 Brush type Hammer Handpiece/Motor Specifications and Features –

• 6-1/4″ overall length, 9/16″ grip diameter, 1″ motor diameter, 13oz/369 gr., 1.5 amps (115V) .75 amps (230V)
• This Hammer Action micromotor is ideal for stone setting applications and engraving techniques. It has a slender contoured grip and impact adjustment ring for precise hammering work. Operates from 0-2,500 strokes per minute. The force of the impact of the MH-011 reciprocating handpiece can be adjusted from light to full by turning the metal ring while the motor is off or running. The speed of the hammer action can also be varied from 0-2,500 strokes per minute with the dial on the control unit. Used with the supplied Graver Holder, the handpiece becomes a precision power engraver- no need for an air compressor or a flexible shaft drive.

For More Foredom Bench Lathes, Accessories and Kits Click Here