Dyer 103 Series Direct Reading O-Ring/Groove Gages
- Easy to use; the gage arms retract to enter the smaller bore, then open into groove diameter
- Direct reading
- Customized standards in 1-2 days
- Fast, accurate, repeatable measurements
- Large, easy-to-read graduations, gage uses a 2-pointer system.
- Metric sizes are also available. Please Inquire.
| Item No. | 103-100-1 | 103-101 | 103-102 | 103-103 | 103-104 |
| Contact Travel | .04" | .04" | 0.8" | 0.8" | 0.8" |
| Reach of Arms Dim L | 1.37" | 1.37" | 3.15" | 3.15" | 3.15" |
| Max. Depth Groove Dim A | 0.036" | 0.098" | 0.21" | 0.29" | 0.29" |
| Min Width Groove Dim B | 0.025" | 0.070" | 0.070" | 0.100" | 0.100" |
| Carbide Ball Contact Standard | 0.004" Radius Chisel | 0.040" | 0.040" | 0.040" | 0.040" |
| Grad./Resolution | 0.0002" | 0.0002" | 0.0005" | 0.0005" | 0.0005" |
| Item No. | 103-105-1 | 103-106 | 103-107 | 103-108 | 103-109 |
| Contact Travel | 0.8" | 0.8" | 0.8" | 0.8" | 0.8" |
| Reach of Arms Dim L | 3.15" | 3.15" | 3.15" | 3.15" | 3.15" |
| Max. Depth Groove Dim A | 0.48" | 0.48" | 0.48" | 0.48" | 0.48" |
| Min Width Groove Dim B | 0.100" | 0.100" | 0.100" | 0.100" | 0.100" |
| Carbide Ball Contact Standard | 0.040" | 0.040" | 0.040" | 0.040" | 0.040" |
| Grad./Resolution | 0.0005" | 0.0005" | 0.0005" | 0.0005" | 0.0005" |
For more info, visit www.p65warnings.ca.gov.
