Scotchman Manual Saw CPO275
Standard Features
- Manual Double Self-Centering Vise Assures Burr-Free Cuts
- Miter Capabilities 45 degrees Left and 45 degrees Right
- Miter Locking Device: quick, accurate setting-stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
- Operator Controlled Trigger Switch
- Capable of Slotting
- Two Cutting Speeds
- Hardened and Ground Worm and Wheel Gear Box
- Worm Wheel of Top Quality Bronze
- Chip Drawer
- 7 Gallon Coolant Tank with Pump
- One 10" Diameter (250 mm) HSS Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt/3 Phase Electrics (must specify voltage)
- Warranty: Three Years
- Made in USA
- For Optional Standard Tooling please Contact Us
Capacities & Specifications
| Cutting Speeds | Must Specify when Ordering | |
| LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe | LT (Low Turn) 30 rpm / 60 rpm | Motor rate: 2.0 hp |
| HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material | HT(High Turn) 60 rpm / 120 rpm | Motor rate: 1.5 hp |
| SS(Single Speed) designed for 220v 1 ph applications | SS (Single Speed) 60 rpm | Motor rate: 2 hp |
| TUBING Round Square Rectangle | 90 Deg 3-3/8" 3" x 3" 3" x 2-3/8" | 45 Deg 2" 2" x 2" 3" x 2" |
| SOLID Round Square | 90 Deg 1-1/2" 1-1/2" x 1-1/2" | 45 Deg 1" 1" x 1" |
| Factory Wired | Specify 208 3 ph 230 3 ph 460 3 ph 575 volt, 3 ph 60 hz 220 1 ph (SS Model Only) | |
| Maximum Diameter Blade | 10-3/4" | 275 mm |
| Arbor Bore | 1-1/4" | 32 mm |
| Pin Spacing | 2/8/45 | |
| Width | 21-7/8" | |
| Depth | 43-1/2" | |
| Height not including handle | 53-1/4" | |
| Height from floor to vise | 36-1/8" | |
| Shipping Weight | 600 lbs. |
For more info, visit www.p65warnings.ca.gov.
