Clausing IberDrill 27.56” Floor Drill Press Variable Speed Belt Drive Adjustable Work Table and Base - Manual Clutch - SZ40

Clausing IberDrill 27.56” Floor Drill Press Variable Speed Belt Drive Adjustable Work Table and Base - Manual Clutch - SZ40

Clausing IberDrill Belt Drive Drill Press with state or the art technology, allows you to select the best rpm for the tool with easy to use potentiometer dial. Electronic inverter 100 – 2000 rpm speeds combined with 4 Hp spindle motor give excellent torque for drilling large holes, small holes to spot-face, counter-bore and ream. Manual quill feed, with capacity production rated 1.34” in steel 1.57” in cast iron, Adding to the end of the model number “RS” adds the automatic tapping feature to this drill press. By setting a limit stop once the quill reaches this the spindle will automatically reverse. 230 or 460 volt 3 phase voltage.

Machine Features:

• Electronic variable inverter
• 4 Hp spindle motor
• Built in low voltage electrical equipment
• Depth scale and adjustable depth stop
• Manual quill feed system
• Adjustable work table
• Work light
• Manual spindle reversing switch
• “RS” Models are equipped with automatic spindle reversing system for tapping
• Thermomagnetic motor breaker switch
• Machined base with coolant tank
• Safety drill guard with microswitch
• Automatic tool ejector
• Emergency stop button
• CE mark

Specifications:

• Drive Type: Electronic Inverter Drive
• Number of Speed Steps: Infinite
• Spindle Speeds (RPM): 100 – 2000
• Column to Spindle Center (in): 13.78
• Spindle Nose: 4MT
• Spindle Travel (in): 6.88
• 3 Feed Range (in/rev): 0.0039, 0.0079, 0.0118
• Spindle to Work Surface Min/Max. (in): 1.97 / 27.2
• Column Diameter (in): 5.91
• Adjustable Table Surface (in): 18.9 x 22.05
• Work Table T-Slots (in): 1/2
• Base Size (in): 31.5 x 18.8
• Drill Capacity with Manual Feed (in): 1.57
• E-Stop Switch: Yes
• Voltage 230 or 460
• Phase: Three
• Motor Horsepower: 5.5