3D Parts & Components - Design and create exhaust tubes around axles, mufflers, gas tanks, and etc. Then the software will provide necessary bending instructions such as length, rotation, and angles, of the tubes with accurate exhaust tube bending and fabricating.

Bend Calculation Output - Software will provide cut length, bend locations, bend angles, and rotations of your created parts for accurate bending/fabrication. Each bend location is based from the end of the tube.

Parts Wizard - Create 3D objects with custom dimensions such as mufflers, axles, tires, and etc. Once created, these objects can be placed inside main 3D environment for accurate exhaust tube routing.

Flat Layout - Obtain/Print flat layout of designed parts. Users can choose which part of the bend they wish to mark (Start/Center/End), along with rotations, angles, spring angles, and CLR display options.

Bending Simulation - Simulation helps the fabricator visualize the bending process before running the part through the machine. This helps to confirm the manufacturability of the part and the bend order.

Designer: Sketch 3D - Click-and-sketch part creation in 3D. Adjustable grid-snapping. Sketch then adjust dimensions. Easy switching between XYZ planes.

Designer: Sketch 2D - Click-and-sketch part creation. Adjustable grid-snapping. Sketch then adjust dimensions. Simple, easy-to-use 2D design.

Designer: Custom Part 3D - The Custom 3D Part interface allows you to enter the definitions of your part in a sequence following the center line of the material. Directional terms are easy to understand for creation of the part. These terms are; left, right, front, back, ceiling, and floor. The bend angles and rotations are automatically calculated.

Multiple Dies For Single Part - Define a part with size definitions for each individual bend.

Designer: Custom Part - Create a part by starting at one end and entering the distance between bends, rotations between bends, and the angle for each bend. The length values can be apex or tangent values.

Designer: Templates - Choose from hundreds of predefined templates. The templates are easy to use and in seconds you will haveyour design completed and be ready to start bending.

Post Bending Cutoff - Cutoff allows extra material to be added at the end of the tube for cutting after bending. The cut length and bend locations are automatically adjusted for cutoff values.

Bend-Tech EXH 3D Exhaust Design Software - BEND-EXH

Brand: Bend-Tech

SKU:: BEND-EXH

ID:: 314221

callling

$325.00

Bend-Tech EXH 3D Exhaust Design Software - BEND-EXH

The Bend-Tech EXH 3D Exhaust Design Software is specially designed to aid in the manufacture of exhaust tubing/pipe.

The main interface of Bend-Tech EXH gives you the ability to re-create the critical components of a vehicle (axles, mufflers, gas tanks, etc) and then properly route the tubing around them. This interface also allows you to create multiple bent and straight tubes within the same design. You can then obtain the cutting/bending instructions for each tube.

The interface is easy to use, using a grid with directions related to a vehicle and a built-in offset tool for avoiding obstacles.

Also included in EXH are several other part designers, including dozens of Templates, Custom Part (LRA), Custom 3D Part, Sketch 2D/3D.

EXH Stand alone: $295
EXH Module: $150 (Requires latest version of PRO or SE)

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

For more info, visit www.p65warnings.ca.gov.

Bend-Tech EXH 3D Exhaust Design Software - BEND-EXH

Bend-Tech EXH 3D Exhaust Design Software - BEND-EXH

Bend-Tech EXH 3D Exhaust Design Software - BEND-EXH

Get Special Offers & Savings