Servo Standard Drill Press, Collet Spindle, 305mm Column - 7150-M
Brand: Servo- SKU:
- 7150-M
- ID:
- 117729
| Type | Standard |
| Spindle | WW Collet |
| Column | 305 mm |
$2,795.00
Servo Standard Drill Press, Collet Spindle, 305mm Column - 7150-M
For laboratory, prototype and precision production work. Available in chuck and collet models, 12" or 19" column, and inch or metric calibration.
Features:
- Inch and Metric versions
- Drill holes down to 0.002” / 0.05mm Dia.
- Spindle runout: 0.0002" / 0.005 mm TIR
- High accuracy down stop for drilling depth control (0.001” / 0.05mm per division)
- Variable speed spindle (200-20,000 RPM)
- Quill travel (stroke): 1.5” / 38.1mm
- Keyless Albrecht chuck versions for quick and easy drill change;
standard 0-1/8" / 0-3 mm; optional 0-1/16" / 0-1.5 mm - WW collet versions for less run out and improved accuracy;
0.0039"-0.252" / 0.1-6.4 mm collet sizes available - Graduated dial gauge for depth control
(0.001” / 0.05mm per division) - Wide selection of bases and accessories
- Drill capacity: to 1/16" in inconel
to 1/8" in steel
to 3/16" in aluminum (collet only) - Electrical: 115 volts AC, 50/60 Hz, 2 amps
(220V/115V transformer available)
Standard | Unique Offset Column | Elbow & Deep Throat |
Specifications:
| I=Inch; M=Metric [ ] = See drawings | 7150-M |
| Chuck or collet | Collet |
| Maximum distance of chuck/collet to base[a] | 7.5" 190 mm |
| Throat depth [b] (spindle CL to column) | 3.5" 89 mm |
| Working base area (width) [c] | 6.5" 165 mm |
| Working base area (depth) [d] | 6.5" 152 mm |
| Column diameter through head [e] | 1.25" 31 mm |
| Column diameter through elbow [f] | - - |
| Column length [g] | 12" 305 mm |
| Footprint width | 7.15" 181 mm |
| Footprint depth | 11.8" 299 mm |
| Overall height | 18" 457 mm |
| Weight | 21 lbs. 9.5 kg |
| Base | Fine grain, ground cast iron base |
See all Servo Standard Drill Presses
For more info, visit www.p65warnings.ca.gov.
