Mitutoyo Linear Gage LGF-Z with Origin Point Mark Series 542 - 542-176
Brand: Mitutoyo- SKU:
- 542-176
- ID:
- 111146
| Range | 2" / 50mm |
| Resolution | 0.0005mm |
$1,020.00
Mitutoyo Linear Gage LGF-Z with Origin Point Mark Series 542 - 542-176
Range: 2" / 50mm
Resolution: 0.0005mm
Optional Accessories:
- Air drive unit:
For 10mm range models: No.02ADE230
For 25mm range models: No.02ADE250
For 50mm range models: No.02ADE270
* Required air pressure: 0.2 to 0.4MPa
* Spindle extends when air is supplied. - Rubber boot (spare):
For 10mm range models: No.238772
For 25mm range models: No.962504
For 50mm range models: No.962505 - Thrust stem set:
For 10mm range models: No.02ADB680
Thrust stem: No.02ADB681
Clamp nut: No.02ADB682
For 25/50mm range models: No.02ADN370
Thrust stem: No.02ADN371
Clamp nut: No.02ADB692
* External dimensions are described in the dimensional drawing of the product.
* Thrust stem set is a combination of thrust stem and a clamp nut. A special spanner is required for tightening.
If using multiple gages, a thrust stem set for each gage and one special spanner are required. - Spanner Wrench:
For 10mm range models: No.02ADB683
For 25/50mm range models: No.02ADB693
Extension Cables:
- Extension cable (5m): 02ADF260
- Extension cable (10m): 02ADF280
- Extension cable (20m): 02ADF300
Applicable Counters:
- EH counter - EH-102Z (542-073A)
- EB counter - EB-11Z (542-094-2)
- EG counter - EG-101Z (542-017)
- EV counter - EV-16Z (542-067)
Specifications:
| Order No | 542-176 |
| Measuring Range | 2" / 50mm |
| Resolution | 0.0005mm |
| Measuring accuracy (20°C) | (1.5+L/50) |
| Quantizing error | ±1 count |
| Measuring Force-Contact Point | upwards - 4.9N or less horizontal - 5.3N or less downwards - 5.7N or less |
| Position detection method | Photoelectric linear encoder |
| Response speed*1 | 1500mm/s |
| Output signal | 90° phase difference, differential square wave (RS-422A equivalent), minimum edge intervals: 250ns for 0.5µm model, 500ns for 1µm model |
| Mass | Approx. 400g |
| Dust/water resistance*2 | Equivalent to IP66 (only gage head) |
| Contact point | ø3mm carbide-tipped (fixing screw: M2.5 (P=0.45)×5), standard contact point No.901312 |
| Stem Dia | ø15mm |
| Bearing type | Linear ball bearing |
| Output cable length | 2m (directly extended from the main unit) |
| Connector | Plug: PRC05-P8M (TAJIMI), Compatible receptacle: PRC05-R8F (TAJIMI) |
| Operating temperature (humidity) range | 0 to 40°C (RH 20 to 80%, no condensation) |
| Storage temperature (humidity) range | –10 to 60°C (RH 20 to 80%, no condensation) |
| Remarks | w/ orgin point mark |
See all Mitutoyo Linear Gages LGF-Z with Origin Point Mark Series 542
For more info, visit www.p65warnings.ca.gov.
