Tungaloy VNMG 332 TN11 NS9530 Cermet Turning Insert Uncoated, RH, 16.1mm Long, 3/8" Inscribed Circle, 1/32" Corner Radius, 35° Diamond, Series TurnLine 6998234 - 47665716
Brand: Tungaloy- SKU:
- 47665716
- ID:
- 678061
$21.23
Tungaloy VNMG 332 TN11 NS9530 Cermet Turning Insert Uncoated, RH, 16.1mm Long, 3/8" Inscribed Circle, 1/32" Corner Radius, 35° Diamond, Series TurnLine
Manufacturer Part #: 6998234
S/N: 47665716
UNSPSC: 23242105
(Minimum Order Quantity=10)
(Please order in multiples of 10)
Specifications:
| Relief Angle | 0 |
| Insert Style | VNMG |
| Corner Radius (mm) | 0.80 |
| Corner Radius (Inch) | 1/32 |
| Corner Radius (Decimal Inch) | 0.0315 |
| Included Angle | 35degree |
| Manufacturer Grade | NS9530 |
| Coating/Finish | Bright/Uncoated |
| Wiper Edge | No |
| Insert Hand | Neutral |
| Insert Thickness | 4.76 |
| Insert Thickness (Inch) | 3/16 |
| Insert Thickness (Decimal Inch) | 0.1875 |
| Series | VNMG-11 |
| Inscribed Circle (Inch) | 3/8 |
| Inscribed Circle (Decimal Inch) | 0.3750 |
| Inscribed Circle (mm) | 15.87 |
| Insert Material | Cermet |
| Insert Shape | Diamond 35 |
| Number Of Cutting Edges | 4 |
| Insert Shape Code | V |
| Hole Diameter (Decimal Inch) | 0.1500 |
| Maximum Depth of Cut (mm) | 2.50 |
| Maximum Depth of Cut (Decimal Inch) | 0.0590 |
| Insert Holding Method | Clamp, Pin |
| Width (Inch) | 3/8in |
| Clearance Code | N |
| Tolerance Code | M |
| Coating Process | Uncoated |
| Length Range (Decimal Inch) | 0.7000 - 10.0000 |
| Rake | Negative |
| Insert Length (mm) | 16.10 |
| Insert Length (Decimal Inch) | 1.3080 |
| Primary Workpiece Material | Steel, Stainless Steel, Cast Iron |
| Primary Workpiece Material Code | P, M, K |
| Iso Code | VNMG160408 |
| Standards | ANSI, ISO |
| Manufacturers Catalog Number | 6998234 |
| Proprietary Coating Designation | Uncoated |
| Coating Classification | Uncoated |
| Chip Breaker | 11 |
| Cutting Edge Style | Honed |
| Industry Standard Number | VNMG 332-11 |
| Width (Decimal Inch - 4 Decimals) | 0.3750in |
| Multi-Use Tool | Yes |
| Full Radius | No |
| Multi-Use Application | Turning, Facing, Boring, Back Turning, Back Boring |
| UNSPSC Code | 23242105 |
| Insert Size Code | 332 |
For more info, visit www.p65warnings.ca.gov.
