Servo Power Milling Table Feed, 140 lbs. Torque, 12" Cross "Y" Feed - 250-140
Brand: Servo- SKU:
- 250-140
- ID:
- 93804
| Servo Model No | M-0250-140 |
| Torque | 140 lbs. |
| Feed Type | 12" Cross "Y" |
$1,295.00
 |
 |
Servo Power Milling Table Feed, 140 lbs. Torque, 12" Cross "Y" Feed - 250-140
*Please note this will only fit Bridgeport Machines built before the year 2010
- Higher Torque than competitive models.
- Controlled feed rate.
- Smooth finish, regulated control eliminates most second finish cuts.
- Automatic shutoff at the end of a cut with electric limit switches.
- Superior thermal characteristics for higher loading.
- Easy installation with mounting hardware kits for more than seventy mills.
- Trouble-free performance, lightweight motor minimizes table deflection problems; safety clutch with limit switch design eliminates damage to lead screw or feeds if a hard stop is encountered.
Specifications:
| Servo Model No: M-0250-140 | |
| Semi-automated machining on Class 1 mills to 3 hp. | |
| Helical gearing and torque limiting friction safety clutch with new and improved gear. | |
| Peak Torque (half-wave series motor) |
to 140 in.- lb. / 15.8 NM torque |
| Intermittent Torque | 105 in.- lb. / 11.9 NM |
| Continuous Torque | 90 in.- lb. / 10.2 NM |
| Variable Feed Rate | .75-25 IPM / 19-635 mm/min (table & cross) .5-12 IPM / 13-305 mm/min (knee) |
| Rapid Traverse | 35 IPM / 889 mm/min (table & cross) 12 IPM / 305 mm/min (knee) |
| Gear Reduction Ratio (motor to screw shaft) |
72:01:00 |
| Electrical | 110V, 50/60 Hz, 2.5A. |
| Approx. weight | 15 lbs. / 6.8 kg. |
See all Servo Power Milling Table Feeds
For more info, visit www.p65warnings.ca.gov.
