Roper Whitney No. 4 Angle Iron Shear w/ Standard Blade & 72" Handle - 140020040
Brand: Roper Whitney- SKU:
- 140020040
- ID:
- 93092
| Call For Price Enable | yes |
Roper Whitney No. 4 Angle Iron Shear
w/ Standard Blade & 72" Handle
The No. 4 Angle Iron Shear is offered with three types of shear blades; standard, contour and special. The standard blades are installed at the factory and all No. 4 shears are shipped with these blades. The contour and special blades must be purchased separately and installed by the user. The same base shearing die can be used with all three shear blades.
Note: Shearing 2" x 2" x 1/8" angle without distortion requires a special blade which also cuts other sizes as shown for contour blade.
Since the extreme capacity of this tool is accomplished by a shearing action, there is a bending out or distortion of one leg of the angle iron when using the standard movable shear blade. To avoid this distortion, a contour moveable shear blade is offered to cut 1/2" x 1/2" x 1/8" to and including maximum contour capacity of 2" x 2" x 3/16".
| Angle Iron Tools Specifications | No. 4 Angle Iron Shear |
| Maximum shearing capacity, mild steel | 2" x 2" x 1/4" |
| Height | 10" |
| Length | 13-1/2" |
| Width | 7" |
| Floor Space Required | |
| Shipping Weight | 51 lbs. |
| Ordering Guide | Item No. | Shipping Weight |
| No. 4 Angle Iron Shear w/ Standard Blade & 72" Handle No. 4 Standard Replacement Blade No. 4 Special 2" x 2" x 1/8" Replacement Blade No. 4 Base Replacement Blade Set | 140020040 350004070 350004025 250004150 | 51 1 1 1 |
For more info, visit www.p65warnings.ca.gov.
