Proxxon Mini Miter 3" Chop Saw KGS 80
Ideal for miter cuts. Instead of swiveling the saw head, the table with clamped down work piece is turned!
By using the fence and counter-rotating the table 2x 45°, one can get the opposite angles for two equally long framing pieces by simply reversing them. Powerful, very quiet DC motor. Power transfer via belt drive. Carbide tipped saw blade 3 1/8" x 1/16" x 3/8" (80 x 1.6 x 10mm), 24 teeth.
Other technical data:
| Volts | 110 - 120V AC, 60Hz |
| Max. Power | 1/4 HP (200W) |
| Speed | 5,400 RPM |
| Table Area | 9" x 9" (230 x 230mm) |
| Weight | 12 lb (6kg) |
Base with round table of pressure-cast aluminum and CNC-machined guides and fittings.
Cutting capacity at 90° (Perpendicular cut):
|
With material thickness up to |
Maximum material width |
Maximum round stock diameter |
|||
|
10 |
3/8" |
65 |
2 9/16" |
Ø 25 |
Ø 1" |
Cutting capacity at 45° (Miter cut):
|
With material thickness up to |
Maximum material width |
Maximum round stock diameter |
|||
|
5 |
3/16" |
36 |
1 13/32" |
Ø 20 |
Ø 3/4" |
- Saw head moves laterally making it possible to get extremely close to the vise holding the work piece when making the cut affording a vibration- and burr-free cut.
- With longitudinal fence stop (overhang 300mm/12")
- Ergonomically correct grip with integrated switch and saw head release mechanism
- Continually adjustable (may be tightened in any position) round table made of pressure-cast aluminum swivels 45° in both directions with positive stops at 15° intervals
- Integrated tightening mechanism with self-centering clamps. V-groove for round pieces. Front side groove for clamping thin work pieces
- Carbide tipped saw blade for non-ferrous metals, wood and plastics. Power transfer via quietly operated belt drive
- Saw blade protection cover made from POLYCARBONATE swings up automatically
# 28-729 - Synthetic resin bonded cut-off wheel
For cutting wood, steel, non-ferrous metals and plastics.
3-1/8" x 3/64" x 3/8" (80 x 1.0 x 10mm)
# 28-732 - Carbide tipped saw blade
Extremely clean cutting edges when cutting balsa wood, plywood or soft wood as well as glass-fiber reinforced plastics (GRP) because of large number of teeth. May also be used for cutting hard wood, POLYCARBONATE, plastics and aluminum. Also fits circular table saw FET.
3-1/8" x 1/16" x 3/8" (80 x 1.6 x 10mm), 36 teeth
# 28-735 - Diamond coated cutting blade for FKS/E, FET, & KGS 80
Diamond Coated Cutting Blade. For clean cuts in ceramics, porcelain, tiles, stone, PC cards.
Ø 3-11/32" x 1/32" x 13/32" bore; (85mm x 0.7mm x 10mm)
For more info, visit www.p65warnings.ca.gov.
