Kent 12" x 50" CNC Knee Mill w/ 3-Axis Acu-Rite CNC Control - KTM-5VKF-E
Brand: Kent USA- SKU:
- KTM-5VKF-E
- ID:
- 322950
| Call For Price Enable | yes |
$0.00
Kent 12" x 50" CNC Knee Mill w/ 3-Axis Acu-Rite CNC Control - KTM-5VKF-E
Features:
- Auto lube system
- Meehanite castings
- Precision ground ball screws
- Acu-Rite 3-axis CNC control
- Hardened & ground square ways
- 5 HP AC frequency drive variable speed spindle motor
- Ultra precision ground spindle with ABEC-7 bearings
- 40NST spindle taper allows heavier cuts than R8 taper mills
Complete with:
- 3-Axis Acu-Rite Control
- Front & Rear Way Covers
- Drawbar for NST-40 Collets
- Manual & Parts List
- Electronic Variable Spindle Speeds
- Hardened & Ground Square Ways
- Automatic Lubrication System
- Complete Operation Manual for Acu-Rite CNC Control
Specifications:
| Model | KTM-5VKF-E |
| Table Size | 12" x 50" |
| Table Travel (X-Axis) | 33" |
| Saddle Travel (Y-Axis) | 18" |
| Knee Travel (Z-Axis) | 15.5" |
| Quill Travel | 5.5" (4" w/ MillPwr-3 CNC control) |
| Ram Travel | 26.75" |
| Spindle Motor | 5 HP |
| Spindle Speed | 60–500–4200 RPM (standard variable speed model) |
| Spindle Taper | NTMB-40 |
| Quill Diameter | 4.173" |
| Quill Feed Rate | 0.0017" / 0.0032" / 0.0054" in/rev |
| Drilling Capacity (Manual/Power) | 1.25" / 0.625" diameter |
| Boring Capacity | 8" diameter |
| Milling Capacity | 2.5 in³/min |
| Maximum Work Load (Center) | 850 lbs |
| Spindle Nose to Table Surface | 4" - 19.5" |
| Spindle Center to Column | 5.25" - 32" |
| Net Weight | 3700 lbs. |
| Gross Weight | 4100 lbs. |
| Shipping Dimensions | 72" x 72" (skid) |
| Power Requirements | 220 volts, 3 phase, 60 Hz, 17 Amp (optional 440v, requires 8.5 Amp) Can run on single phase power |
For more info, visit www.p65warnings.ca.gov.