Centroid CNC Touch Probe - DP-4
The DP-4 is a mechanical trigger type probe. The DP-4 is suited for all types of probing and digitizing that does not require very long styli. So to make a decision on which probe that fits your type of work; use the DP-4 for all around job shop type work (part and fixture probing, and 2D/3D digitizing).
DP-4 Touch probe is made in USA with patented technology
CENTROID manufactures its own touch probes which are more accurate and more reliable that other competing probes on the market. Designed specifically for Digitizing with a milling machine, our probes are so accurate the only limitation is the resolution of the milling machine. Manufactured of stainless steel the DP-4's mechanism requires only a feathers touch to trigger. Unlike other probes, the DP-4's low trigger force allows the use of small styli for maximum detail. The stylus is interchangeable and large selection of different sizes and types of styli are available. The size of styli depends on the size and shape of the object you are copying. Works with both CENTROID's part and fixture Probing cycles and CENTROID Digitizing cycles.
Includes DP-4 probe and probing cycles.
Features:
- Unidirectional Repeatability .00004” (1 micron)
- Part Probing, Fixture Offsets, & Digitizing
- State of the art Kinematic design
- Mounts to any 1/2” tool holder
- Customizable mount for special applications
- Small diameter body 1.25” (31.8 mm)
- Cable communication for reliability
- Interchangeable Styli
- Works with most any CNC control or DRO with a probe input and probe software
The CENTROID DP-4 CNC Touch probe is designed for Probing (part setup, zero location setup, and CMM type location and measurement of part geometry), component/fixture/work piece setup, inspection and 3D or 2D digitizing/surfacing. The DP-4 CNC Touch probe is made in the USA with patented technology. Manufactured of stainless steel the DP-4’s mechanism requires only a feather’s touch to trigger. The DP-4’s low trigger force allows the use of small styli for maximum detail and accuracy.
Commonly used on Milling machines, Machining centers, Routers and Turning centers. The DP-4 is a state of the art mechanical design and is compatible with most CNC controls and DRO’s that have a PLC input for probes and probe software. The CENTROID DP-4 is reliable and is an affordable alternative to Renishaw or Marposs touch probes. Previously sold exclusively for use with a CENTROID CNC control, now the DP-4 is available for use with other CNC controls and DRO’s such as Fagor, Haas, Fanuc, Fadal, Mazak, Mach3 and many more.
Uses:
- Copy and reproduce complex 3D parts from originals
- Automatic Job & Work Coordinate System setup
- Measure parts before they are removed from the machine
- Eliminate the need for expensive indicators and fixtures
- More accurate and repeatable than manual part setup
- Increase throughput on the machine
- Reduce rework and scrap, shorten lead times
- Increase machine tool automation and reduce human error
- Automatic Vise/Fixture setup, no alignment needed
- Works in conjunction with Coordinate System Rotation.
- Finds diameters, locations, angles & features
- Automatic part feature location and setup, great for repairs
- Much faster than setting up parts manually
- No batteries, no lighting restrictions, no RF crosstalk, just reliable easy plug-and-play operation
Specifications:
| Probing directions | X +/- , Y +/- , Z - |
| Unidirectional repeatability | 0.00004” (1 um) |
| Probe deflection force (X,Y) | 3 ounce w/ 1.693” L (43mm) stylus |
| Probe deflection force (Z) | 9 ounce minimum |
| Probe body diameter and length | D=1.25” (31.8mm), L=2.2” (56.4mm) |
| Mounting shank diameter | D=0.5” (12.7mm), L=1.47” (37.2mm) |
| Stylus thread mount | M3 |
| Over travel limit angle (X,Y) | +/- 10 degrees from vertical |
| Over travel limit (Z-) | 0.15 inch (3.8mm) maximum |
| U.S Patent # | 6553682 |
Click to view Replacement Styli for Centroid Probes
For more info, visit www.p65warnings.ca.gov.
